Auto masking System Tire Masks. The Set of 4 Tire Masks cling to the wheel surface for easy taping. Resistant to IR curing lamps. Paint adheres well to this waterproof mask, so there is no need to remask between base coat and top coat. Includes 4 wheel covers.
Engine turning, or damascening, has long been the hallmark of fine automotive craftsmanship. This technique leaves metal surfaces with a swirled pattern, really setting off your vehicle. Great for any flat polished metal surface - firewalls, valve covers, dashboards. Either of these two kits will allow you to customize your vehicle with this process using specially formulated abrasive rolls and your drill press. Two kits are available: the 1" Kit con- tains two 1" diameter rolls and mandrel; the 1/2" Kit contains two 6" long rolls, which yield six 2" working rolls. Complete instructions included.
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. bottles.
6 SWITCH UNIVERSAL ROLL BAR MOUNT #50416 - Universal toughness for street, strip, off-road, trucks, and suvs. Anodized, brushed aluminum panel with six switches comes with peel and stick labels for custom wiring. Non-fused, roll bar mount. Wire length: 18 feet.
LARGE SWITCH KIT #80121 - One 2 position headlight switch, one floor mounted dimmer, two GM stylegrounding door jam switches, and one universal ignition switch with keys.
A must when upgrading to high performance bulbs. Utilize these upgraded wiring harnesses to make sure there is proper voltage being utilized to power these new higher intensity bulbs. Kit comes with instructions to help you in the process. Available in several different kits depending on your specific bulb application.
PARK & NEUTRAL RELAY KIT #60122 - This kit uses the stock neutral safety switch to also provide for ECM park/neutral ground signal needed when installing factory-style fuel injection into older vehicles. For use with any aftermarket shifter or column mounted neutral safety switch.
When doing bodywork and replacing panels, make sure the left is the exact same shape as the right. Profile gauge accurately duplicates shapes that are almost impossible to sight with the naked eye. Just press against any panel and the individually sprung plastic blades produce a mirror image. Hundreds of uses. Especially handy when fitting floor boards around steering columns and pedals. Reproduces details as deep as 1 3/4". Imported.
Increase the capacity of your PRO HotCoat Gun with this new adapter kit. Holds 8 times the capacity of the gun cup. This kit is used with the (10298) HotCoat Hopper System.
Use this optional 3/4" adapter to extend the Drill Doctor's capabilities to includes sizes over 1/2" to 3/4".
Ideal for aggressive removal of material prior to buffing. Easily applied to a Spiral or Loose Sewn buffing wheel, these Compounds smooth out the roughest casting edges quickly, speeding your buffing project and saving you time. Best for leveling highly contoured surfaces. 3 lbs. of Compound per poly bag. Apply to wheels spinning at 2500 rpm or faster.
Race Time - Featuring vibrant graphics, and convenient single "AA" battery power (not Included) this clock is sure to be a popular item for your den, garage or shop. Clock measures 11" wide by 23" tall. Five year manufacturer's warranty. Please allow 14 days for delivery.
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans.
Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate pieces where larger buffs simply will not reach. All are made of long-lasting hard felt and will work well with any of the buffing compounds. Great for cleaning out residue left from buffing. A perfect accessory for the Foredom Craft Kit. The smaller 1/8" shank sets are ideal for trim pieces and the 1/4" shank set is great for engine component buffing. Max 15,000 rpm.
Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foam backed headliner material measuring 4' 5" wide by 6' long (enough for most cars), 2 dome light clips, and instructions on the box. Headliner can be modified to accommodate sunroof equipted vehicals.
Paint Prep and Clean-Up Kit - Here are the essentials in one easy to use kit. Easily fill your gravity gun with the Paint Gun Stand (34008). The Disposable In-Line Air Filter (34066) provides a final layer of air quality assurance to prevent moisture or oil from ruining a panel. Use the Auto Mask System (34134) to quickly mask an entire vehicle for panel repair work or to protect another vehicle in the spray area. After the paint is applied thoroughly clean the gun with the 17-piece Cleaning Brush Set (34109). The Moisture (34103) and Oil (34104) Separators assure air quality at the source.
2-1/16" Single Pod Nissan Skyline GTR 91-94 (RHD)
This kit includes both the (40008) Windshield Repair Kit and the (52030) Diamond Windshield Burr. Most stone chips and small breaks only penetrate the outer layer of the windshield. This kit repairs them with a unique resin that actually penetrates the inner layer. Not for use on radiating cracks. The diamond burr with 1/8" shank is used to make a precise hole in the glass so the resin can be more readily injected.
The pk of 12 Replacement High Density Polyethylene Rods work well with your Plastic Welding Kit to repair this material. To identify the material type do a burn test on a small sample. Both low and high density Polyethylene burn with no smoke, blue flame and a candle wax odor when flame is extinguished. these rods are 1/8" diameter x about 9". Longer lengths and larger diameters are available upon request. Low density is more flexible than high density.
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 1/8"- 1/4". Plugs are reusable.
Mechanic's Seat and Creeper Set - Rugged steel frames with vinyl cushions and easy rolling nylon ball-bearing casters. Seat is 14" high with bottom tool tray. Creeper is 36" long with underslung construction and headrest. Imported. The Soft Lifter Jack Pad (43183) attaches to your trolley jack. Prevents scratched frames.
3-3/8" 80 mph Z-Series Speedometer (M)
House of Kolor Black Cap
The quickest, easiest way to put large, burr-free holes in sheet metal (up to 16 gauge). Just drill a starting hole, insert punch, then thread die on opposite side and turn with allen wrench (not included). Made in England with heat treated steel.
Both the Trim Hammer (#13146) and the Mini-Anvil (#13031) are the perfect size for intricate trim work. The Mini-Anvil weighs 1/2 pounds, and measures approximately 2 1/2"H X 1 5/8"W X 5 1/8"L. $23.98 if purchased separetely.
Utility Pick with Wooden Handle - Blunt pick offers gentler panel raising. The 1-1/2" diameter low crown round face works well for smoothing and stretching. Made in the USA. Limited Lifetime Manufacturer's Warranty.
H3 bulb Xenon Hyper White 12V 55W
The carbide Blast Nozzle offers superior durability compared to steel and ceramic nozzles. For best results use this Carbide nozzle with a Carbide air jet. The Carbide Air Jet (22080B) is available separately.
Undercoat removal made easy! Here's the solution for undercoats that can be imprinted with a thumbnail. Biodegradable undercoat remover quickly loosens the bond of the undercoating to the base metal and allows you to easily scrape it loose. Use PRE Painting Prep to remove any remaining residue for a "paint ready" surface. Not for use on baked-on, epoxy or urethane undercoatings. For cleaning up an area to be welded, this is a must! 17 oz. net wt. aerosol.
The Chassis & Running Gear video features techniques to systematically restore front and rear suspension components. This 95 min video also includes rear axle and transmission repair.
Great idea source of useful welding projects for your shop, auto, house, yard, and more. Detailed diagrams and material lists show you how to build practical items like stands, carts, equipment, and much more. Softbound, 96 pages. By James A. Ruck.
This 52" long flex shaft lets you work in tight areas where a drill just won't reach. Features pre-lubricated and sealed ball bearings, a 1/4" arbor end which attaches to your drill or drill press, and a 5/16" chuck. Each end also has a strain relief sleeve to prevent kinking. Operates best between 800 and 2,500 rpm. Use only with 4" diameter or smaller buffs. Avoid tight radius bends to maximize shaft life. Made in Germany.
No nonsense dry vacuums that work great for all your auto detailing needs and more. These US Made dual turbine units feature a reusable cloth dust bag and develop more suction than most household vacuums. Also great to use as heated blowers to speed drying of cars and motorcycles. Developes 4-peak hp. Includes 24' hose, wall mount bracket, 2-20" extension wands, Pik-all Nozzle, crevice tool, "Powerizer" air maximiser, "Magic Air" inflator adapter, dust brush, 4 piece micro cleaning tool kit. 12' power cord and instructions. 1-year manufacturer's warranty.
Unique textured surface lasts twice as long as conventional belts, resists loading up with metal, provides a more uniform sanding surface than conventional belts and is available in ultra fine grits of 700 and 1200. This belt is comparable to 100 grit.
Removing glued-in windshields can be tricky. The clearances between the dash- board and the inside of the glass is often too small for a knife to fit and prying on the glass will almost certainly break it. This handy kit contains everything you will need to remove your windshield safely, with minimal risk of breakage. Includes 72 feet of heavy duty wire which can be cut to length, an awl to feed the wire between the glass and the sealing tape, two handles with allen set screws and an allen wrench to secure them.
Boost/Vac Mech. 30 In. Hg.-Vac/15 PSI Includes 6ft nylon tubing, with 1/8" & 1/4" NPT fittings.
EMISSION HARNESS #60315 FOR PART #60207 - Installing a fuel injection harness and want to keep all your emissions devices intact? Harness activates the AIR Port solenoid control, AIR Diverter Solenoid or Canister Purge Solenoid to meet local emissions standards.
Need Roadside Assistance - This 119 pc. Multi-use tool set could get you out of a jam. Make minor adjustments and repairs. Set includes 3/8" ratchet, 3/8" and 1/4" drive metric and SAE sockets, 1/4" adapter, 3/8" U-Joint, spark plug sockets, long nose plier, diagonal cutter, 5 SAE and 5 Metric combination wrenches, 6" adjustable, 3 screwdrivers, 20 specialty bits, wire crimper, terminals, detail brush, and knife in a molded plastic case.
These Delta 100 Series Thinline Fog Lamps feature a lead crystal lens and Black powder coated metal housing. Light mounts with the included adjustable bracket. Kit includes 2 complete light units, 55 watt Xenon bulbs, mounting hardware, switch, relay, in-line fuse, and wiring harness. Made in the USA. Ltd 5 yr. manufacturer's warr. Each light unit measures 6.3" diameter by 2.3" deep.
Marblizer artistic bases offer you an exciting new paint finish. A wide range of effects can be achieved using this unique coating, from a deep marble appearance to a snake skin appearance. Many other effects are open to the innovative painter. Use two colors for increased depth or apply Kandys for awesome effects. Marblizers are universal base coats that may be cleared for a final finish, or used as a base coat for Kandys. Due to their unique chemistry make-up, they may be top-coated with either acrylic lacquer or urethane enamel. No mixing required. Apply over Black Base 8513ZP.
Window Handle Removal Tool
When doing bodywork and replacing panels, make sure the left is the exact same as the right. Profile gauge accurately duplicates shapes that are almost impossible to sight with the naked eye. Just press against any panel and the individually sprung plastic blades produce a mirror image. Hundreds of uses. Especially handy when fitting floor boards around steering columns and pedals. Reproduces details as deep as 1 3/4". Imported.
Upgrade your fixed-lens welding helmet into a modern electronic auto-dimming helmet for a fraction of the price of a new one with these replacements. Eliminates the hassle of helmet flipping and lets you keep both hands and your eyes on the work. Lens darkens in 1/25,000 of a second after it detects a spark! Fits all welding helmets with 2"h x 4 1/2" w lens opening (some modification to your existing lens retainer may be necessary).
Slide Hammer Puller Set - Use this multifunction set to meet your pulling needs. The approximately 5 lbs sliding weight creates enough pulling impact to readily remove bearings, rear axles and more. Includes parts needed to convert this 23" slide hammer into a 2 or 3 jaw internal or external puller, puller hook, dent puller, axle puller with low and high (3-3/8") puller flange, locking plier adapter. Instructions included. Imported.
Hotcoat Powder Dark Green 2 lb
When installing seals and bearing races, it is critical to drive them in correctly. If not driven in perfectly square, seals could leak and bearings can fail prematurely. Includes six easily changed discs and an aluminum drive handle. Use the flat side of the discs to drive seals, use the tapered side to drive races.
Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate pieces where larger buffs simply will not reach. All are made of long-lasting hard felt and will work well with any of our buffing compounds. Great for removing residue left from buffing. A perfect accessory for the Pro Craft Motors (13305 and 13328). These 1/4" shank buff bobs are ideal for trim and engine component buffing. Maximum recommended RPM 15,000.
Too Hot To Touch? Ambidextrous Mechanixwear "heat sleeve is made from oil, fuel and water resistant Kevlar". Sold in pairs, one size fits all. Sleeves measure 17" long and stretches to a 5 1/2" diameter opening.
This Set includes one each of the 10" Buffs with 3/4" diameter hole: Sisal, Spiral, Canton and Loose.
Eastwood's yellow ultra-high-molecular-weight plastic mallets stretch and form sheet metal. Screw secured head captures handle within for proper fit and allow the head top to be used for forming. Made in the USA.
Tail Light Resto Kit. Plastic lenses become dull and scratched over time. Use Simichrome on a soft cotton cloth to remove light scratches and discoloration. Reflective Aluminum aer. paint restores the brightness to lamp reflectors. For lenses that need more attention use the included Plastic Compound on the 6" String or 6" Loose Section Buff. The String Buff runs cool to prevent soft plastic parts from melting, for more aggreassive smoothing on harder plastics use the 6" Loose Section Buff.
Weld-In Adapter Steel adapter for all mechanical oil and transmission temperature gauges. For All Mechanical Temperature Gauges
RELAY BASE WITH TERMINALS #80133 - Made of High Impact ABS thermo plastic. Terminals provided.
Heat Sheath Aluminized Sleeving from DEI - Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from high temp aluminized fiberglass fabric sewn into a tube. Reflects up to 90% of the heat. Made in the USA.
Resin backed and last 3 times longer than standard sandpaper. Safe up to 22,000 rpm. Grind and polish castings, port heads, and finish small parts. Arbor hole is 1/8", use only with mandrels listed. Note: Different sizes and grits available. 80 grit (coarse); 120 grit (medium); 240 grit (fine) 320 grit (extra fine). When working on Aluminum or other soft metals, use Grinder's Grease for a smoother cut. Save by ordering the Tight Spot Grinding Kit or order different size and grits individually from chart.
For most GM vehicles from 1965 to present.
One hand operation leaves the other free to handle the valve keepers. Depth and width of spring cap jaws are easily adjustable. Throat depth is 7 1/2". Fits most engine heads.
Economy Welding Helmet - Full face welding protection has never been more affordable. This helmet features a comfortable adjustable headband and 2" x 4 1/4" shade 10 lens. Rugged molded plastic shield protects face from light and weld spatter.
Rivets - Aluminum Countersunk box/500
Pertronix Flame Thrower II High Performance Ignition Coils - Maximise spark voltage with these 45,000 volt performance coils. Designed for use with the Ignitor II electronic ignition. These canister style oil filled coils are available in chrome (70027) or black (70025). Use the black to maintain a stock look. Legal in all 50 states and Canada CARB E.O. #D-57-10. Made in the USA. 90 day manufacturer's warranty. Use the (70047) Chrome Plated Coil Bracket with this coil.
to shop online at Eastwood Company.
